Would an attendant switch make a difference here?Ī 3300 error is a 'Hopper Empty' error on an IGT S+ machine. Are there any other tests I can use or other adjustments I can make? My machine also does not have the attendant key but a push button on the side by the arm. I've seen posts about people using a clear chip but one of the warning messages by the folks who know way more than me was not to ever use it. This is officially where I ran out of ideas. One other thought I had was to cheat the door sensor so I could watch but the hopper does not turn when the door is shut, only during a test. Ordered new of each but that doesn't seem to be creating the 3300 error. Completely disassembled, cleaned, and reassembled the hopper only to figure out the coin counter switch works fine but the knife and wiper are not making correct contact after adjustment. I ran test number 3 to have it output 10 coins and that works - sort of.
Got it cleared, put it all back, shut door and the code stayed. Opened the door and checked the hopper (coins present) and found a jammed coin in between the halves of the plastic bucket. After a ten coin payout came up and it spit out 2 coins, a 3300 code appeared. After some very minor repairs, the machine was playing. I am a first time slot machine owner and purchased one that was not working.
